Full Product Description:
Console, Vehicle specific, 25" Total mounting space, 0 Degrees, Housing complete, Dodge Charger, 11-12

MSRP: $375.00

Abbreviated Product Description:
CON, VS, 25TMS, 0DG, HC, CHGR, 11-12,

Additional Info:
- Installation Instructions (PDF)

- New Product Release (PDF)

Features & Benefits:

• 25" console for 2011-2012 Dodge Charger (police package)
• 9.5" max depth at rear and 7.375" min at front of the console (see side view measurement diagram)
• For applications when more depth is needed. such as self contained/one piece radio's or long control heads
• See drawing min/max for mounting depth allowed for control heads and/or options
• Custom fit console uses OEM floor mounts no permanent vehicle modification required
• Includes filler plates (FP) and/or equipment brackets (EB) to completely enclose mounting area less internal mount options
• Includes 3 cutouts for two OEM 12 volt plug outlets and one MP3/USB port in front trim panel cover
• The cutouts will accept both the OEM lighter plugs or the Havis lighter plug kit (C-HK-181) included
• Vehicle mounting kit included
• If your vehicle has the optional carpet interior, there will be a small hole in the carpet not covered by the console housing at the rear. if desired, an optional cover plate part number - CM001642 is available. ($13.00 msrp)
• Accepts C-SM-MMP, C-SM-SA, C-SM-SA-1 and C-SM-SA-1-HD
• C-TCB-7 or C-HDM-204 can be mounted to the side of the console housing, some mounting holes must be drilled by the installer
• C-VS-0809-CHGR-1 console is recommended for laptop applications
• C-VS-2400-CHGR-2 console is recommended for low profile applications
• If using a vertical gun rack between seats, a partition with gun alcove is recommended
• Accepts C-SM-MMP, C-SM-SA, C-SM-SA-1 and C-SM-SA-1-HD
• C-TCB-7 or C-HDM-204 can be mounted to the side of the console housing, but lower mounting holes must be drilled by the installer
• C-VS-0809-CHGR-1 console is recommend for laptop applications
• If using a vertical gun rack between seats, a partition with gun alcove is recommended
• Part Weight: 22.00 lbs

Be sure to list all equipment you wish to install in the console.  We will need make, model, brand, etc...