81 Tom Harvey Rd. Westerly, RI 02891
HOURS: Mon - Fri (9-5 EST.) Phone: 1-401-454-4487

Havis 2011-2017 Dodge Charger 25" Console

an artwork by  Havis
Havis 2011-2017 Dodge Charger 25" Console
Havis Dodge Charger 25" Console

Part Number:

C-VS-2500-CHGR-1
Your Price:$282.99
Retail Price:$394.80
You Save:$111.81(28%)

Choose Options

Equipment Information
Same Day Shipping
On most orders placed by 3pm EST when choosing UPS shipping options
text

FEATURES

  • 25" console for 2011-2017 Dodge Charger (police package)
  • 9.5" max depth at rear and 7.375" min at front of the console. intended for applications when more depth is needed such as self contained/one piece radio's or long control heads (see side view measurement diagram)
  • See "Side View Depth Measurements" below for mounting depth allowance of control heads and/or options
  • Custom fit console uses OEM floor mounts no permanent vehicle modification required
  • Includes filler plates (FP) and/or equipment brackets (EB) to completely enclose mounting area less internal mount options
  • 1.5" high plate C-EB15-DAP-1P available for OEM aux input module in Charger street appearance applications. (must specify)
  • Includes 3 cutouts for two OEM 12 volt plug outlets and one MP3/USB port in front trim panel cover
  • The cutouts will accept both the OEM lighter plugs or the Havis lighter plug kit (C-HK-181) included
  • Vehicle mounting kit included
  • If your vehicle has the optional carpet interior, there will be a small hole in the carpet not covered by the console housing at the rear. if desired, an optional cover plate p/n: CM001642 is available.
  • If using a vertical gun rack between seats, a partition with gun alcove is recommended
  • C-TCB-7 or C-HDM-204 can be mounted to the side of the console housing, but lower mounting holes must be drilled by the installer
  • C-VS-0809-CHGR-1 console is recommend for laptop applications
  • C-VS-2400-CHGR-2 console is recommended for low profile applications
  • C-SM-MMP, C-SM-SA, C-SM-SA-1 and C-SM-SA-1-HD will bolt to the upper nut track or installer can drill mount holes as desired
  • If using a vertical gun rack between seats, a partition with gun alcove is recommended

SPECIFICATIONS

  • C-TCB-7 or C-HDM-204 can be mounted to the side of the console housing, some mounting holes must be drilled by the installer
  • C-VS-0809-CHGR-1 console is recommended for laptop applications
  • Accepts C-SM-MMP, C-SM-SA, C-SM-SA-1 and C-SM-SA-1-HD
  • Gross Weight: 22.00 lbs
  • IsoView Drawing (JPG) »
  • Side View Depth Measurements (JPG) »

Please note in text box above all the equipment to be installed in console. If no equipment or brackets are noted, console will be shipped with filler plates only.

Reward Points

283 points will be rewarded to you when you buy this item.

Related Items

Recently Viewed Items