|
The SUPERPAK606X features 15 flash patterns that are easily selected via a single wire pattern selection scheme. The SUPERPAK606X also features selective switching - you can enable or disable pairs of strobe heads for optimum flexibility in your application. The SUPERPAK606X pattern set features a unique cycle mode that sets it apart from competition. The SUPERPAK606X includes features not found on any other power supply in the industry. Features - 15 Flash Patterns including Cycle
- Single Wire Pattern Select
- Selective Head Switching
- Twin Diagnostic LEDS
- EZ Panel Connector
- AMP Mate-N-Lok connectors - Industry Standard
- Multi-Voltage input standard - 10 to 30 VDC
- Die-Cast Baseplate
- 5 Year Factory Direct Warranty
- Microcontroller- Based strobe engine
Specifications - Model: SUPERPAK606
- Outlets: 6
- Outlet Power: 60 Watts in high power mode, 40 watts in low power mode
- Output Energy: 51.5 Joules
- Input Voltage: 10 to 30VDC
- Input Power: 70.4 Watts
Construction - Designed and manufactured in the United States of America
- AMP Mate-N-Lock connectors - industry standard
- Two field-replaceable, 15 amp automotive spade-type fuses
Dimensions - Length: 5.6"
- Width: 6.6"
- Height: 2.15"
The SUPERPAK 80 and 90 watt power supplie are the heart of a truly effective strobe warning system. The multiple flash patterns of the SUPERPAK, from double flash to quintuple flash, provide the high intensity light bursts that make any emergency vehicle easily visible in the worst weather conditions. Count on the SUPERPAK as a reliable workhorse to power two to six strobe heads, directional or 360 degree, for any vehicle that needs to be clearly visible during bright sunlight conditions or inclement weather. The SUPERPAK features 32 flash patterns, a variety of selective switching modes, and comes in 80 and 90 watt models. With thousands of field proven units installed and a rock solid 5 year warranty, the smart choice is the dependable SUPERPAK906 or 806 strobe power supply for the heart of your warning system. Features - Microprocessor controlled double, quadruple, quintuple and MEGA flash standard
- Multi-voltage input standard 10 to 30VDC
- 32 Flash patterns and selective switching standard
- Tube De-ionization circuit to prolong flashtube life
- Over-voltage/absent flashtube protection
- MOSFET circuitry for cool and quiet operation
- EMI/RFI Filtering
- High/Low intensity control
- Reverse polarity protection
- Input surge protection
Specifications - Model: SUPERPAK806, SUPERPAK906
- Outlets: 6
- Outlet Power: 94 Watts (806), 106.2 Watts (906)
- Output Energy: 66 Joules (806), 74.4 Joules (906)
- Input Voltage: 10 to 30VDC
- Input Power: 94 Watts (806), 106.2 Watts (906)
Construction - Designed and manufactured in the United States of America
- AMP Mate-N-Lock connectors - industry standard
- Mounting hole locations and connectors match Whelen UPS and SPS series for simple field upgrade
- Field-replaceable, 15 amp, automotive spade-type fuse
- Anodized aluminum baseplate and cover
Dimensions - Length: 6.6"
- Width: 5.5"
- Height: 2.6"
AVAILABLE SWITCHES - Switch-1 is a universal lighted on/off switch with mounting bracket
- Switch-6WH is a plug & Play switch that is specific to the 80 & 90 watt paks and comes with a full length plug in harness.
- Switch-CSP/PRO is a plug & Play switch that is specific to the 60 watt power supply only and comes with the full length plug in harness. It features a push putton flash pattern selector.
- Switch-ROTA6 is a plug & Play switch that is specific to the 80 & 90 watt paks and comes with a full length plug in harness. It features a rotary dial for flash pattern selection.
- Switch-ROTA5 is a plug & Play switch that is specific to the 80 & 90 watt paks and comes with a full length plug in harness. It features a rotary dial for flash pattern selection.
 |
