The XPAK604X features 15 flash patterns that are easily selected via a single wire pattern selection scheme. The XPAK604X also features selective switching- you can enable or disable pairs of strobe heads for optimum flexibility in your application. The XPAK604X pattern set features a unique cycle mode that sets it apart from the competition. The XPAK604X includes features not found on any other power supply in the industry.

Choose the new, state-of-the-art Nova XPAK604X,  for your next warning signal application. With a packed feature list and a solid factory warranty, the XPAK604X is the top choice for modern strobe warning signal applications.

Features Xpak 604

• 15 Flash Patterns including Cycle
• Single wire pattern select
• Selective head switching
• Twin diagnostic LEDS
• EZ Panel Connector
• AMP Mate-N-Lok connectors - industry standard
• Multi-voltage input standard - 10 to 30 VDC
• Die-Cast baseplate
• Microcontroller-base strobe engine

Specifications

• Model: XPAK604X
• Outlets: 4
• Outlet Power: 60 Watts in high power mode, 40 Watts in low power mode
• Output Energy: 51.5 Joules
• Input Voltage: 10 to 30VDC
• Input Power: 70.4 Watts

The X-PAK 804 and 904 are heavy duty strobe power supplies designed for use in fire, police, utility, construction and other emergency vehicles. The X-PAK is the heart of a truly effective strobe warning system for the entire vehicle.

The multiple flash modes of the X-PAK, from double flash to quintuple flash, provide the high intensity light bursts that make any emergency vehicle easily visible in the worst weather conditions. Count on the X-PAK as a reliable workhorse to power two to four strobe heads, directional or 360 degree, for any vehicle that needs to be clearly visible during bright sunlight conditions or inclement weather.

With thousands of field proven units installed and a rock solid 5 year warranty, the smart choice is the dependable X-PAK strobe power supply for the heart of your warning system.

Features Xpak 804 & 904's

• MOSFET circuitry for cool and quiet operation
• EMI/RFI Filtering
• Reverse polarity protection
• Over-voltage/absent flashtube protection
• Tube De-ionization circuit to prolong flashtube life
• Microprocessor controlled double, quadruple, quintuple and Mega flash standard
• Multi-voltage input standard - 10 to 30 VDC
• Selective switching standard
• High/Low intensity control
• Input surge protection

Specifications

• Model: XPAK804, XPAK904
• Outlets: 4
• Outlet Power: 80 Watts (804), 90 Watts (904)
• Output Energy: 72 Joules (804), 80 Joules (904)
• Input Voltage: 10 to 30VDC
• Input Power: 100 Watts (804), 110 Watts (904)

Dimensions all Nova Xpak's

• Length: 5.6"
• Width: 6.6"
• Height: 2.15"

AVAILABLE SWITCHES

• Switch-1 is a lighted univeral on/off switch with mounting bracket.
• Switch ROTA-4 is a custom lighted switch with on/off, high/low, and a rotary dial for flash pattern control.  It also includes a 10 foot long plug and play harness so no running of wires is required.  THIS SWITCH CAN ONLY BE USED ON THE 80 AND 90 WATT POWER SUPPLIES.
• Switch CSP/PRO is a custom lighted switch with individual on/off switches and a momentary button for changing of flash patterns.  It also includes a 10 foot long plug and play harness so no running of wires is required.  THIS SWITCH CAN ONLY BE USED FOR THE 60 WATT POWER SUPPLY.

This is a build it yourself strobe system.   Just choose the power supply wattage, color of the strobe tubes, and even the lengths of your cables.   You can even find all of your options for this system here as well.