Whelen CenCom Saphire Switchbox Siren Module with Control Head

AVAILABLE MODELS

• CCSRN3: Position Slide Switch and 18 Push Button Control Head with Amplifier Control Module with pigtails, Microphone with CCMICX20 Included
• CCSRN35: 3-Position Progressive Push Button Switches and 9 Push Button Hand Held Control Head with Amplifier Module with Pigtails, and CCMICX20 Included
• CCSRN36: 3 Section Control Head and 8-Push Buttons, 4-Position Slide Switch with a 7-Position Rotary Knob. Manual, Airhorn Plus 3 Traffic Advisor™ Switches

CenCom Sapphire delivers what you’ve been asking for in a sleek, new, tougher, more advanced design. CenCom Sapphire adds an integrated WeCan® serial port for connecting your Whelen WeCan series lightbar directly to the Amplifier Control Module. No more bulky wires and secondary boxes to contend with. Just plug in and go! Indicator LED's have been added to each output creating a simple, highly visible way to facilitate troubleshooting shorted or broken connections in your vehicle’s wiring. Fuses and connections are easily accessible without having to use any tools or remove any covers. All high current outputs are fused for your convenience. New, heavy-duty power and output connectors can handle rough treatment without damage or accidental disengagement and are easily accessible on the front face of the Amplifier Control Module. Connections have been consolidated into fewer connector housings, saving time and space. Configuration programming is easier than ever with newly redesigned CenCom Sapphire software. CenCom Sapphire retains the highly regarded simplicity of our previous CenCom software, with new features and added flexibility; including the ability to configure your Whelen WeCan lightbar!

SPECIFICATIONS

• Input Voltage: 12.5VDC +/- 20% (negative ground only)
• Main Input Current: 80 Amps Max.
• Standby Current: .100NA
• Operating Temp: .-30C to +60C
• Storage Temp.: .-40C to +70C
• Humidity: .99% (Noncondensing)

SIREN/AMP MODULE

• Wail: 725 to 1600 Hz 12 cycles/min.
• Yelp: 725 to 1600 Hz 180 cycles/min.
• Piercer: 725 to 1600 Hz 800 cycles/min.
• Hi/Low: .550 to 650 Hz 60 cycles/min.
• Airhorn: Composite Constant
• Audio Bandwidth: @25 Watts, 300 to 10000 Hz +/- 3db
• Distortion: @25 Watts @1KHz, 1% Maximum
• Output Voltage: @15VDC @11ohms, 24Vrms Maximum
• Speaker Impedance: 5.5 Ohms Minimum

• Outlet #1: 40 Amps Max. (fused)
• Outlet #2: 20 Amps Max. (fused)
• Outlet #3: 20 Amps Max. (fused)
• Note Total of Outlets 1, 2, 3 to exceed 50 Amps
• Outlet #4: 10 Amps Max. (fused)
• Outlet #5: 10 Amps Max. (fused)
• Outlet #6: 10 Amps Max. (fused)
• Outlet #7: 10 Amps Max. (fused)
• Outlet #8: 10 Amps Max. (fused)
• Note Total of Outlets 4 – 8 not to exceed 50 Amps
• Outlet #9: 0.25 Amps Max. (fused)
• Outlet #10: ....0.25 Amps Max. (fused)
• Outlet #11: ....0.25 Amps Max. (fused)
• Outlet #12 (horn relay) .........0.25 Amps Max. (fused)

OTHER MODELS

• CCSRN3: 3-Position Slide Switch and 18 Push Button Control Head with Amplifier Control Module with pigtails, Microphone with CCMICX20 Included
• CCSRN35: 3-Position Progressive Push Button Switches and 9 Push Button Hand Held Control Head with Amplifier Module with Pigtails, and CCMICX20 Included
• CCSRN36: 3 Section Control Head and 8-Push Buttons, 4-Position Slide Switch with a 7-Position Rotary Knob. Manual, Airhorn Plus 3 Traffic Advisor™ Switches
• CCSRN3A: Same as CCSRN3, Except with 8 (Positive or Negative) Input Expansion Module (will not override any pre-existing control head features), 12 Total Inputs
• CCSRN3F: Same as CCSRN36, Except with 8 (Positive or Negative) Input Expansion Module (will not override any pre-existing control head features), 12 Total Inputs
• CCSRNTA3: Same as CCSRN3, with Traffic Advisor™ Module
• CCSRNT35: Same as CCSRN35, with Traffic Advisor™ Module
• CCSRNT36: Same as CCSRN36, With Traffic Advisor™ Module
• CCSRNT3A: Same as CCSRNTA3, Except with 8 (Positive or Negative) Input Expansion Module (will not override any pre-existing control head features), 12 Total Inputs
• CCSRNT3F: Same as CCSRNT36, Except with 8 (Positive or Negative) Input Expansion Module (will not override any pre-existing control head features), 12 Total Inputs
• CCTRIM: Trim Ring Option, for Semi-Flush Mounting of Control Head